Difference between revisions of "Phage"
(Created page with "=Phage Band= The phage band is a small flexible circuit board that's designed to be soldered in a loop of WS2812 RGB LEDs. The board has the following features: * Powered off ...") |
|||
| Line 18: | Line 18: | ||
http://bunniefoo.com/bunnie/phageband2.png | http://bunniefoo.com/bunnie/phageband2.png | ||
http://bunniefoo.com/bunnie/phageband1.png | http://bunniefoo.com/bunnie/phageband1.png | ||
| + | |||
| + | Below is what the board looks like after you've sheared off the microphone and programming headers: | ||
| + | |||
| + | http://bunniefoo.com/bunnie/phageband4.png | ||
Below is a concept of how the board might look mounted into a ribbon of WS2812 LEDs: | Below is a concept of how the board might look mounted into a ribbon of WS2812 LEDs: | ||
http://bunniefoo.com/bunnie/phageband-mount.png | http://bunniefoo.com/bunnie/phageband-mount.png | ||
Revision as of 12:27, 5 July 2013
Phage Band
The phage band is a small flexible circuit board that's designed to be soldered in a loop of WS2812 RGB LEDs.
The board has the following features:
- Powered off of +5V via microUSB header
- ATTiny85 for pre-programmed light patterns
- A single pushbutton to control operation mode
- If both ends of the WS2812 ribbon is soldered to the board, the ATTiny85 can automatically detect the length of the LED string
- Microphone and pre-amp with gain control selection (aka "robot heart mode")
- Flex circuit construction
- programming header and microphone section can be sheared off with scissors if they are not needed for a more compact driver circuit
- Steel stiffener plate under ribbon solder point and microUSB header for mechanical robustness
Below are renderings of how the board will look:
Below is what the board looks like after you've sheared off the microphone and programming headers:
Below is a concept of how the board might look mounted into a ribbon of WS2812 LEDs:
