Difference between revisions of "Palawan DVT"

From Studio Kousagi Wiki
Jump to: navigation, search
(Created page with "Palawan DVT represents a complete redesign. The main MCU has changed, and we now use a SoM for the radio. ==Palawan Rx ECOs== *ECO1*: The LED is backwards, and should be fl...")
 
Line 4: Line 4:
  
 
*ECO1*: The LED is backwards, and should be flipped around.
 
*ECO1*: The LED is backwards, and should be flipped around.
 +
*ECO2*: RFM69HW DIO0 is connected to a pin that cannot generate an interrupt.  Move DIO0 to PTA10, PTA11, or PTA12.
 +
 +
==Palawan Tx ECOs==
 +
 +
*ECO1*: There is a stray via on the board.  Run DRC prior to exporting to gerbers to repour copper.
 +
*ECO2*: RFM69HW DIO0 is connected to a pin that cannot generate an interrupt.  Move DIO0 to PTA10, PTA11, or PTA12.

Revision as of 08:56, 8 June 2017

Palawan DVT represents a complete redesign. The main MCU has changed, and we now use a SoM for the radio.

Palawan Rx ECOs

  • ECO1*: The LED is backwards, and should be flipped around.
  • ECO2*: RFM69HW DIO0 is connected to a pin that cannot generate an interrupt. Move DIO0 to PTA10, PTA11, or PTA12.

Palawan Tx ECOs

  • ECO1*: There is a stray via on the board. Run DRC prior to exporting to gerbers to repour copper.
  • ECO2*: RFM69HW DIO0 is connected to a pin that cannot generate an interrupt. Move DIO0 to PTA10, PTA11, or PTA12.