Difference between revisions of "Fernvale Breakout v1 to v2 ECO"

From Studio Kousagi Wiki
Jump to: navigation, search
(Created page with "This is a list of all the changes applied to the board from v1 to v2 of the breakout board. Each change has the format of issue summary/resolution, and specific change. ==ECO 1...")
 
 
Line 5: Line 5:
 
==ECO 1: Add vibrator breakout==
 
==ECO 1: Add vibrator breakout==
 
A pair of wire pads for the vibrator motor were added to the design. The through-hole pads are 2.5mm apart and meant to have a vibrator motor soldered into the holes.
 
A pair of wire pads for the vibrator motor were added to the design. The through-hole pads are 2.5mm apart and meant to have a vibrator motor soldered into the holes.
 +
 +
==ECO 2: Fix interference with RF board==
 +
C11A and C10A make contact with the RF board. Move them to prevent touching.

Latest revision as of 14:41, 15 April 2015

This is a list of all the changes applied to the board from v1 to v2 of the breakout board.

Each change has the format of issue summary/resolution, and specific change.

ECO 1: Add vibrator breakout

A pair of wire pads for the vibrator motor were added to the design. The through-hole pads are 2.5mm apart and meant to have a vibrator motor soldered into the holes.

ECO 2: Fix interference with RF board

C11A and C10A make contact with the RF board. Move them to prevent touching.