Command line wifi configuration

If you don't have a remote control for your NeTV, or you lost it, you can still configure wifi.

Do the following:

• Plug NeTV into the USB port of your computer
• wait for NeTV to boot and register as an ethernet device.
• ssh to 10.0.88.1 as root
• from here, you will need to do the following:

cd /psp

cat > network_config

<configuration allocation="dhcp" encryption="AES" auth="WPAPSK" key="foobar" ssid="yourssid" type="wlan" /> ^D

killall hostapd

killall dnsmasq

/etc/init.d/NetworkManager restart