Command line wifi configuration
If you don't have a remote control for your NeTV, or you lost it, you can still configure wifi.
Do the following:
- Plug NeTV into the USB port of your computer
- wait for NeTV to boot and register as an ethernet device.
- ssh to 10.0.88.1 as root
- from here, you will need to do the following:
cd /psp
cat > network_config
<configuration allocation="dhcp" encryption="AES" auth="WPAPSK" key="foobar" ssid="yourssid" type="wlan" />
^D
killall hostapd
killall dnsmasq
/etc/init.d/NetworkManager restart
