Phage2014
Contents
Phage 2014 Offerings
LED Strips
- WS2812 LED strip, 30 LEDs/m, black backing, silicone tubing. $6.47/meter
- WS2812 LED strip, 60 LEDs/m, black backing, silicone tubing. $10.32/meter
Rain Tubes
- Rain tube, 50cm long, bundle of 10, multi-color pack. $20/pack of ten
- Rain tube, 50cm long, bundle of 10, white only. $20/pack of ten
http://bunniefoo.com/bunnie/phage2014/raintube.mp4
Fairy Lights
- Fairy light, 5.2m 100 LED "vine", pastel color, powered by 12V adapter. $5.50 with 12V adapter.
- Fairy light, ~20 LED LED "vine", purple, powered by 3xAA batteries. $2, batteries not included.
Battery packs
- 5V USB battery pack. 8500mAh. Dual output, 1A and 2.1A heads. Displays remaining capacity and discharge rate via LED display. $15 w/1x microUSB charger cable.
- 5V USB battery pack. 2000mAh. Single output, 1A head. No UI. $3 w/1x microUSB charger cable.
Phage Pager
Light controller and paging badge, for phage campers only. Please note quantities are limited: only 50 pieces with radio, and up to 80 pieces without radio can be made. Sign-up sheet is pending first working prototype.
Features this year include:
- Greatly reduced cost
- Version with radio, accelerometer, microphone, and LED driver: $20
- Version with just LED driver: $10
All versions include:
- STM32F microcontroller
- drive hundreds of LEDs
- multiple strip driver ports
- Possible to daisy chain to create matrix display (requires you to code up comms bus)
- Program STM32F via serial port using FTDI serial cable (same as used on Arduino)
- 4x UI butons to make it easier to change patterns and adjust brightness
- Simple form factor
- USB-A plug can plug directly into battery pack with no cable
- USB-A plug is more robust and can handle more abuse than microUSB
- USB-A plug is for power only. It does not show up as a USB device.
- 68mm x 25mm in-line form factor
Radio version includes:
- 900 MHz radio pager, compatible with 2013 badge
- SMA coax whip antenna, 1/4 wave 2" antenna provided
- Estimate 2-4x range of last year's badge
- Better performance in a crowd of people
- Single built-in diagnostic LED to indicate when being paged
- Typically combined with WS2812 belt lights for better effect
- Features open-drain driver which can power, for example, a laser mounted upward so it's easy to find people in a crowd
- Accelerometer
- Disable laser driver output when user is not standing upright
- 800Hz update rate, can work as a pedometer if someone would write software for it
- Silicon MEMS microphone (should handle dust better than electret cartridge mic)