Orchard EVT1 to DVT1

From Studio Kousagi Wiki
Revision as of 14:56, 24 April 2015 by Bunnie (talk | contribs)
Jump to: navigation, search

ECO1: Fix Microphone mirroring

Microphone schematic symbol was mirrored. No BOM change, board layout change only.

ECO2: Make battery easier and safer to solder

Space battery terminals wider, increase pad size, and add solder mask openings around the battery tabs. This makes it less likely to short wires together during a botched soldering operation.

ECO3: Fix gas gauge topology

Gas gauge goes between the charger and battery, not between the charger and the system. Oops!

Retrieved from "https://kosagi.com/w/index.php?title=Orchard_EVT1_to_DVT1&oldid=1581"