Novena/Debian Wheezy Bootstrap
Revision as of 11:01, 10 July 2014 by Jimmy Tang (talk | contribs) (Created page with "== Debian Wheezy Debootstrap == **A VERY ROUGH SET OF INSTRUCTIONS, RUN WITH CARE** This set of instructions assumes you have a functioning Novena board with Debian Wheezy. The...")
Debian Wheezy Debootstrap
- A VERY ROUGH SET OF INSTRUCTIONS, RUN WITH CARE**
This set of instructions assumes you have a functioning Novena board with Debian Wheezy. These instructions are primarily for people who want to re-create the firmware/base image.
Prerequisites
- An existing Novena board running Debian Wheezy .
- Root access on your board, ideally have sudo access with no password.
- A 4gb microsd card.
- A reasonably fast network connection.
- Approximately 10gigs of free diskspace (more is probably better so you can cache things during testing/dev) - ideally get a SSD plugged into the board.
