Difference between revisions of "Orchard validation matrix"
(→Validation Matrix) |
(→Power Consumption) |
||
| Line 92: | Line 92: | ||
No difference when hibernation instruction is given to gas gauge. | No difference when hibernation instruction is given to gas gauge. | ||
| + | |||
| + | ==Battery life estimates== | ||
| + | With 1200mAh battery: | ||
| + | * 16 LEDs on a modest pattern will last 14 hours | ||
| + | * LEDs off, but OLED, BLE on: ~30 hours | ||
| + | * VLLS0 sleep will last 2000 hours (80 days) | ||
| + | * Ship mode will last ~10,000 hours (~1 year) | ||
| + | |||
| + | With 4000mAh battery: | ||
| + | * 16 LEDs on a modest pattern - 47 hours (~2 days) | ||
| + | * LEDs off, but OLED, BLE on: 100 hours (~4 days) | ||
| + | * VLLS0 sleep: 6,500 hours (9 months) -- this is about self-discharge rate anyways, so probably half this duration | ||
| + | * Ship mode: 30,000 hours (~3.8 years) -- in reality, self-discharge is faster than this. | ||
Revision as of 19:43, 4 June 2015
Validation Matrix
| Subsystem | basic status | extended status | notes |
|---|---|---|---|
| Kinetis-W CPU | OK | basic SWIO functions OK, OS operational | |
| WS2812B driver | OK | confirmed CPU has GPIO performance to operate on-board LEDs; extended chain testing TBD | |
| I2C | OK | OK | |
| SPI | OK | OK | |
| OLED | OK | ||
| UART | OK | Works well enough for chibiOS | |
| Integrated radio | OK | ||
| BLE | OK | ||
| Accelerometer | OK | ||
| Microphone | ECO1 / OK | OK | Schematic symbol mirrored; requires board respin. Tested OK on EVT1b |
| MPR121 | OK | OK | |
| Jog dial + buttons | OK | OK | |
| GPIO expander | OK | OK | |
| Fancy battery charger | OK | OK | |
| Shipping state power | OK | OK | immeasurable leakage when in "ship mode" e.g. soft battery disconnect state |
| Gas gauge | OK/ECO3 | OK | gas gauge itself works fine, talks on I2C; but topological position is incorrect and requires ECO3 to be effective |
| USB charging port | OK | ||
| USB charging port OC protect | |||
| Cheesy battery charger option | N/A | not populated in EVT1 | |
| Cheesy battery level option | N/A | not populated in EVT1 | |
| On-state power characterization | OK | ||
| Standby power characterization | OK |
Power Consumption
As measured while on battery, ~3.9V through test.
- Powered on, 16 LEDs running wave-rainbow at default brightness: 78-79mA
- Halted (debug mode) 16 LEDs frozen on wave-rainbow: 76.5mA
- Captouch off: 76.5mA (not measurable reduction)
- LEDs off: 40mA
- Accel off: 39.8mA
- BLE off: 33.1mA
- OLED off: 58.7mA
- Boost off: 25.3mA
- gpiox off: 25.3mA
- PEE-PBE: 22.7mA
- PBE-FBE: 22.1mA
- FBE-FEI: 21.5mA
- Radio off, CPU halted: 3.0mA
Alt-order:
- Halted, everything on: 77.5mA
- Captouch off: 77.4mA
- LEDs off: 40mA
- Accel off: 39.9mA
- BLE off: 33.1mA
- Boost off: 33.2mA
- OLED off: 24.7mA
- gpiox off: 25.3mA or 24.6mA?
- PEE-PBE: 22.7mA
- PBE-FBE: 22.1mA
- FBE-FEI: 21.4mA
- Radio stop: 3.0 mA
- CPU to VLLS0: 0.6mA
Ship mode:
- 0.09mA - 0.130mA leakage (no hibernate instruction to gas gauge)
No difference when hibernation instruction is given to gas gauge.
Battery life estimates
With 1200mAh battery:
- 16 LEDs on a modest pattern will last 14 hours
- LEDs off, but OLED, BLE on: ~30 hours
- VLLS0 sleep will last 2000 hours (80 days)
- Ship mode will last ~10,000 hours (~1 year)
With 4000mAh battery:
- 16 LEDs on a modest pattern - 47 hours (~2 days)
- LEDs off, but OLED, BLE on: 100 hours (~4 days)
- VLLS0 sleep: 6,500 hours (9 months) -- this is about self-discharge rate anyways, so probably half this duration
- Ship mode: 30,000 hours (~3.8 years) -- in reality, self-discharge is faster than this.
