Difference between revisions of "Fernvale Breakout v1 to v2 ECO"
(Created page with "This is a list of all the changes applied to the board from v1 to v2 of the breakout board. Each change has the format of issue summary/resolution, and specific change. ==ECO 1...") |
(No difference)
|
Revision as of 17:52, 7 March 2015
This is a list of all the changes applied to the board from v1 to v2 of the breakout board.
Each change has the format of issue summary/resolution, and specific change.
ECO 1: Add vibrator breakout
A pair of wire pads for the vibrator motor were added to the design. The through-hole pads are 2.5mm apart and meant to have a vibrator motor soldered into the holes.
