Difference between revisions of "Fernvale DVT1 to DVT2 ECO"
(Created page with "This is a list of all the changes applied to the board from DVT1 to DVT2. Each change has the format of issue summary/resolution, and specific change. ==ECO 1: Default to no JT...") |
(No difference)
|
Revision as of 09:05, 5 February 2015
This is a list of all the changes applied to the board from DVT1 to DVT2.
Each change has the format of issue summary/resolution, and specific change.
ECO 1: Default to no JTAG
BPI_BUS(1,0) = 10 turns on JTAG over SD card pins, making SD inoperable.
Remove R10C, which allows internal pull-down in MT6260 to set BPI_BUS(0,0) = 00, which indicates no JTAG at all.
| DVT1 | DVT2 | Notes |
|---|---|---|
| R10C 10k, 1% | R10C DNP | remove from BOM but leave footprint |
