Difference between revisions of "Novena/Debian Wheezy Bootstrap"
Jimmy Tang (talk | contribs) (Created page with "== Debian Wheezy Debootstrap == **A VERY ROUGH SET OF INSTRUCTIONS, RUN WITH CARE** This set of instructions assumes you have a functioning Novena board with Debian Wheezy. The...") |
Jimmy Tang (talk | contribs) |
||
| Line 1: | Line 1: | ||
== Debian Wheezy Debootstrap == | == Debian Wheezy Debootstrap == | ||
| − | + | '''A VERY ROUGH SET OF INSTRUCTIONS, RUN WITH CARE''' | |
This set of instructions assumes you have a functioning Novena board with Debian Wheezy. These instructions are primarily for people who want to re-create the firmware/base image. | This set of instructions assumes you have a functioning Novena board with Debian Wheezy. These instructions are primarily for people who want to re-create the firmware/base image. | ||
Revision as of 11:02, 10 July 2014
Debian Wheezy Debootstrap
A VERY ROUGH SET OF INSTRUCTIONS, RUN WITH CARE
This set of instructions assumes you have a functioning Novena board with Debian Wheezy. These instructions are primarily for people who want to re-create the firmware/base image.
Prerequisites
- An existing Novena board running Debian Wheezy .
- Root access on your board, ideally have sudo access with no password.
- A 4gb microsd card.
- A reasonably fast network connection.
- Approximately 10gigs of free diskspace (more is probably better so you can cache things during testing/dev) - ideally get a SSD plugged into the board.
