Difference between revisions of "Novena AFE"
(→EVT bringup notes) |
|||
| Line 4: | Line 4: | ||
*R17P is wrong. The current value of 45k sets the output to 3.3V. Should be 52.3k to set the output to 3.7V | *R17P is wrong. The current value of 45k sets the output to 3.3V. Should be 52.3k to set the output to 3.7V | ||
*R21C, R20C is too weak. Set to 1k to overcome the internal bias on SP0,1 | *R21C, R20C is too weak. Set to 1k to overcome the internal bias on SP0,1 | ||
| + | ===Loop filter tuning=== | ||
| + | Generated using ADIsimCLK - save file ad9520-3-calck.clk | ||
| + | *R38C 1500pF -> 82pF | ||
| + | *R23C 3k -> 2.7k | ||
| + | *C37C 4.7uF -> 3.3nF | ||
| + | *R25C 2.1k -> 1.3k | ||
| + | *C36C 2200pF -> 270pF | ||
| + | |||
| + | *Loop bandwidth: 102 kHz | ||
| + | *Phase margin: 43.6 deg | ||
| + | *Zero: 37.1 kHz | ||
| + | *Pole: 275 kHz | ||
| + | *Last pole: 951kHz | ||
| + | |||
| + | Estimated phase noise and jitter to ADC: | ||
| + | <pre> | ||
| + | Frequency: 1.00000GHz | ||
| + | Broadband Jitter (>1kHz) = 558fs rms | ||
| + | SNR = 69.10dB ENOB = 11.52bits | ||
| + | at IF Freq = 100MHz | ||
| + | Integrated Phase Noise from 100kHz to 1.25MHz | ||
| + | Timing Jitter = 302fs rms | ||
| + | Phase Jitter EVM = 0.19 %rms | ||
| + | Phase Jitter = 0.109 degrees rms | ||
| + | ACI / ACR = -57.5dBc | ||
| + | Delay from Ref to OUT3 is 250ps | ||
| + | </pre> | ||
Revision as of 13:11, 11 February 2014
Notes on Novena AFE
EVT bringup notes
- R17P is wrong. The current value of 45k sets the output to 3.3V. Should be 52.3k to set the output to 3.7V
- R21C, R20C is too weak. Set to 1k to overcome the internal bias on SP0,1
Loop filter tuning
Generated using ADIsimCLK - save file ad9520-3-calck.clk
- R38C 1500pF -> 82pF
- R23C 3k -> 2.7k
- C37C 4.7uF -> 3.3nF
- R25C 2.1k -> 1.3k
- C36C 2200pF -> 270pF
- Loop bandwidth: 102 kHz
- Phase margin: 43.6 deg
- Zero: 37.1 kHz
- Pole: 275 kHz
- Last pole: 951kHz
Estimated phase noise and jitter to ADC:
Frequency: 1.00000GHz
Broadband Jitter (>1kHz) = 558fs rms
SNR = 69.10dB ENOB = 11.52bits
at IF Freq = 100MHz
Integrated Phase Noise from 100kHz to 1.25MHz
Timing Jitter = 302fs rms
Phase Jitter EVM = 0.19 %rms
Phase Jitter = 0.109 degrees rms
ACI / ACR = -57.5dBc
Delay from Ref to OUT3 is 250ps
