Difference between revisions of "Fernvale Breakout v1 to v2 ECO"
(Created page with "This is a list of all the changes applied to the board from v1 to v2 of the breakout board. Each change has the format of issue summary/resolution, and specific change. ==ECO 1...") |
|||
| Line 5: | Line 5: | ||
==ECO 1: Add vibrator breakout== | ==ECO 1: Add vibrator breakout== | ||
A pair of wire pads for the vibrator motor were added to the design. The through-hole pads are 2.5mm apart and meant to have a vibrator motor soldered into the holes. | A pair of wire pads for the vibrator motor were added to the design. The through-hole pads are 2.5mm apart and meant to have a vibrator motor soldered into the holes. | ||
| + | |||
| + | ==ECO 2: Fix interference with RF board== | ||
| + | C11A and C10A make contact with the RF board. Move them to prevent touching. | ||
Latest revision as of 14:41, 15 April 2015
This is a list of all the changes applied to the board from v1 to v2 of the breakout board.
Each change has the format of issue summary/resolution, and specific change.
ECO 1: Add vibrator breakout
A pair of wire pads for the vibrator motor were added to the design. The through-hole pads are 2.5mm apart and meant to have a vibrator motor soldered into the holes.
ECO 2: Fix interference with RF board
C11A and C10A make contact with the RF board. Move them to prevent touching.
